 |
|
|
|
|
|
|
|
ARGUS 180, FLUSH-MOUNTED |
|
|
| |
ARGUS flush-mounted movement detectors ensure that no one is left fumbling in the dark in corridors, hallways, or staircases. |
|
|
|
|
|
|
|
|
|
| |
 |
Flexibility and convenience using integrated switches
A major advantage of the ARGUS 180 flush-mounted movement detectors: the switching time can be adjusted between 1 second and 8 minutes. Conversion from automatic control to maintained lighting or switching off completely is also possible on request and by using a slide switch.
Design for illustration: System M, M-ARC, white
|
|
 |
|
|
|
|
|
|
|
|
|
|
| |
 |
Application module for KNX
Moreover, integration of the ARGUS indoor movement detector into the KNX intelligent building system technology could not be easier. As regards the design of the INSTABUS ARGUS flush-mounted movement detectors, you can choose from the whole range of Merten flush-mounted switches.
Design for illustration: System Surface, ARTEC, aluminium
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
 |
Safety and security with waterproof movement detectors
The flush-mounted ARGUS 180 is also available in two waterproof designs, AQUADESIGN and AQUACLASSIC, for use in damp areas, swimming pools, cellars, garages, patios, or balconies.
Design for illustration: AQUADESIGN, polar white
|
|
|
|
|
|
|
|
|
|
|
|
|
ARGUS 180 / 2.20M FM |
|
|
| |
Ingenious technology, clear design One that doesn't miss a trick |
|
|
|
|
|
|
|
|
|
| |
 |
Horizontal and vertical registration in the interior area
Something that sets flush-mounted ARGUS 180/2.20M apart from other movement detectors: It's installed at a height of 2.20 m and registers movement by looking downwards. The advantage: Even the very first step into the room switches the light on. A positive side effect of the higher mounting position: the best possible protection against damage.
Thanks to the anti-crawl protection and a range of 8 m on either side and 12 m in front, no-one can get past the flush-mounted ARGUS 180/2,20M undetected.
The flush-mounted ARGUS 180/2.20m is available for conventional and for KNX applications. For the first time, the sensitivity of the conventional variant can be adjusted by using a dial on the back of the movement detector. Software is used for this purpose in the KNX version.
The unit is supplied with clip-on covering panels to reduce the angle of detection, thereby masking out zones that are not required.
The flush-mounted ARGUS 180 / 2.20m is available in System M design.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
